9600 baud Scanner programming card

9600 baud Scanner programming card


9600 baud Scanner programming card

02/01/2013

The document below contains a PDF4i7  Barcode and is used to program the Scanner for IDWedge, IDWedge2.0 and IDWedgeBT.  Download the document, and use scissors to cut out the Barcode, and tape it to ID card or a piece of construction paper, so that you can scan the card in the Barcode slot of the scanner.

Default settings9600.pdf

With the Scanner powered on, insert and remove the card, you should here a triple beep indicating the card has re-programmed that scanner.

For IDWedgeBT, after scanning the 9600 card, you will have to turn the scanner off/on to read the new settings.




    • Related Articles

    • IDWedgeBT with HanDBase Android Demo – Easy Custom Forms with ID Card Data Capture

      IDWedgeBT with HanDBase Android Demo – Easy Custom Forms with ID Card Data Capture Purpose HandDBase by DDH software provides an easy way to build custom forms that can be partially filled in by the Tokenworks IDWedgeBT ID Scanner. The software is ...

    • IDWedgeBT Working with QuickBooks 2013

      IDWedgeBT Working with QuickBooks 2013 IDWedgeBT Working with QuickBooks 2013 IDWedgeBT Form Filler: QuickBooks 2013 Introduction The IDWedgeBT has the capabilities of automatically filling out ANY form. Everything from Google Docs to QuickBooks to ...

    • IDWEDGEBT serial programing cable

      IDWEDGEBT serial programing cable IDwedgeBT serial programming cable The serial cable is shownon the left. It is USB serial cable adapter.

    • IDWedgeBT HanDBase iPad Demo – Easy Custom Forms with ID Card Data Capture

      IDWedgeBT HanDBase iPad Demo – Easy Custom Forms with ID Card Data Capture Purpose HandDBase by DDH software provides an easy way to build custom forms that can be partially filled in by the Tokenworks IDWedgeBT ID Scanner. The software is currently ...

    • IDWedgeBT HID Bluetooth Keyboard Application Updater

      IDWedgeBT HID Bluetooth Keyboard Application Updater The IDWedgeBT Application Updater requires a special programming cable and a PC with a serial port, or a USB->Serial adapter. The application has on screen instructions on how to perform the ...