How to Enable Continuous Scan (Auto-Scan) on AgeVisor 3 | TokenWorks Support

How to Enable Continuous Scan (Auto Scan) on the AgeVisor 3

How to Enable Continuous Scan (Auto Scan) on the AgeVisor 3

Continuous Scan automatically activates the barcode reader every second, eliminating the need for the user to tap Scan each time an ID needs to be scanned.


To enable continuous scan or auto scan on your AgeVisor 3 please follow the directions below.




Step 1: Tap on the Gear symbol on the top left of the screen to exit the scanning screen.





Step 2: Tap on Configuration.


NOTE: You will be prompted to enter your pincode (default pin: 5678).






Step 3: Tap on Advanced.




Step 4: Scroll down to Enable Continuous Scan. Tap on OFF so it switches to ON.

After enabling Continuous Scan, press Back to navigate back to the scanning screen. 




Step 5: Start the scanning process by tapping on Scan. The barcode reader will now continuously activate without the user having to tap the Scan button. 




    • Related Articles

    • AgeVisor 3 will not scan IDs or Passports

      Problem: AgeVisor 3 will not scan IDs or Passports Follow the troubleshooting instructions below if your AgeVisor 3 will not scan IDs and/or Passports. Re-configuring the Barcode Scanner Step 1: Tap on the gear symbol on the top left. Step 2: Tap on ...

    • How to enable Google Find My Device on an AgeVisor 3

      How to enable Google Find My Device on an AgeVisor 3 The following instructions provide a step by step tutorial on how to install Google's “Find My Device” feature on an AgeVisor 3. This feature is useful to all clients in any environment. Whether ...

    • Scanner Beeps but does not Display Data

      Scanner Beeps but does not Display Data/Not Connected Error Problem: When scanning a 2D barcode, the scanner beeps, but the data is not being displayed. Possible Cause: This could be caused by the scanner not connecting when the application starts ...

    • AgeVisor 2 Quickstart Guide and User Manual

      Attached are the latest Quickstart Guide and Manual for the AgeVisor 2. Click on each attachment to view each document in the browser. To download, click on the download icon next to the attachment.

    • IDentiFake - Dirty Scanner Alert

      Dirty Scanner Alert on IDentiFake If you’re receiving a “Dirty Scanner Alert” error message, it means the scanned image quality is low. This is normally caused by dirt build up from IDs. To accurately authenticate IDs the scanner must produce a ...