How to Setup IDWedgeBT as USB Keyboard on Mac OSX

How to Setup IDWedgeBT as USB Keyboard on Mac OSX


How to Setup IDWedgeBT as USB Keyboard on Mac OSX

  1. Connect the IDWedgeBT to the Mac with the included RJ50 / USB cable.
  2. The Keyboard Setup Assistant window will appear with the message “Your keyboard cannot be identified…” Press Continue.
    Mac OSX Keyboard Setup Assistant
  3. The Identifying Your Keyboard window will appear. It will ask you to press the key to the right of the left Shift key. Press the Escape Key.
    Mac OSX Identifying Your Keyboard
  4. Click Skip.
    Skip Mac Keyboard Identification
  5. On the Select the Keyboard Type screen, choose ANSI (United States and others). Press Done.
    US ANSI Keyboard Mac IDWedgeBT
  6. Open a text editor like TextEdit and click the cursor in the text field. Swipe/Dunk an ID to confirm that the IDWedgeBT is connected and transmitting keyboard input.



    • Related Articles

    • IDWedgeBT not recognized as USB keyboard – Unknown Device

      IDWedgeBT not recognized as USB keyboard – Unknown Device Problem Description: IDWedge BT not recognized as USB keyboard, unknown device. See picture below: Trouble shooting Possible fixes: 1.) UnPlug and replug non working unit into same USB port on ...

    • IDWedgeBT Firmware Update – using USB Virtual Serial Port Cable and Updater software

      IDWedgeBT Firmware Update – using USB Virtual Serial Port Cable and Updater software IDWedgeBT Firmware Update – using USB Virtual Serial Port Cable and Updater software Introduction This document explains how to update the firmware in an IDWedgeBT. ...

    • IDWedgeBT Keyboard Application Updater 2 3

      IDWedgeBT Keyboard Application Updater The IDWedgeBT Keyboard Application Updater requires a special programming cable, and a PC with a serial port, or a USB->Serial adapter. The application has on screen instructions on how to perform the update. ...

    • IDWedgeBT Keyboard Application Updater 2 4

      IDWedgeBT Keyboard Application Updater The IDWedgeBT Keyboard Application Updater requires a special programming cable, and a PC with a serial port, or a USB->Serial adapter. The application has on screen instructions on how to perform the update. ...

    • IDWedgeBT Keyboard Application Updater 2 2

      IDWedgeBT Keyboard Application Updater The IDWedgeBT Keyboard Application Updater requires a special programming cable, and a PC with a serial port, or a USB->Serial adapter. The application has on screen instructions on how to perform the update. ...