Problem: AgeVisor Touch beeps, but does not display data

Problem: AgeVisor Touch beeps, but does not display data

Problem: AgeVisor Touch beeps, but does not display data

Problem: When scanning a 2D barcode, the scanner beeps, but the data is not being displayed.

Possible Cause: This could be caused by the scanner not connecting when the application starts up

Solution: Set the scanner to automatically connect on startup

Step 1:

Click on the Connection button in the Settings tab


Step 2:

Check the boxes next to POS HID Scanner Enabled and MSR Magstripe Enabled.

NOTE: If you have an AgeVisor Touch that ONLY scans barcodes, please only check POS HID.

If the COM port for M260/MSR Port is COM1 change it to be the other option (typically COM3).

Press the following buttons in order:

  1. Connect MSR
  2. Config MSR
  3. Connect POS HID
  4. Config/Test Scanner

Check the box for Automatic Port Open

Press Save/Exit


Step 3:

Go back to the Main tab and attempt to scan an ID. If it correctly displays the information, then the issues should now be solved. If the issue continues, contact Tokenworks support.


    • Related Articles

    • How To Enable Location Checking on AgeVisor/AgeVisor Touch

      Location Checking on AgeVisor and AgeVisor Touch What is Location Checking? Location Checking allows you to import whitelisted locations allowed at your business. They can include any combination of Address, City, State, or Zipcode. After a ...

    • AgeVisor Touch Software Update – Notification Email List

      AgeVisor Touch Software Update – Notification Email List AgeVisor Touch Software Update Notification Email List Please complete this form to create an account, receive email updates and much more. Contact Email * Company Name  First Name  Last Name  ...

    • How to fix a broken update on AgeVisor Touch, AgeVisor, IDWedgePro, IDVisor Sentry

      How to fix a broken update on AgeVisor Touch, AgeVisor, IDWedgePro, IDVisor Sentry Last modified: October 9, 2019 at 10:17 am by Justin Problems with automatic software updates (message box indicating a problem with the update) If your Tokenworks ...

    • Date and Time Does Not Change In AgeVisor Touch Application

      Problem: The Date and/or Time is showing incorrectly on your AgeVisor Touch, but the updated Date and/or Time will not save or the time stays incorrect after changing to correct time. Example: Incorrect time shown. The correct time is 11:03 am.   ...

    • Age Will Not Display Correctly On IDVisor Smart Plus

      Problem Description: Age will not display correctly on the screen.     Customer age is not displaying correctly after a scan. This issue may be caused by the font size on the device being set to the largest setting. Please follow the steps below to ...