IDVisor 3 Case Swap Guide

IDVisor 3 Case Swap Guide

Estimated time to setup : < 1 minute

Step 1) Pull the top of the scanner out of the case first.


Step 2) Pull the scanner completely out of the pistol grip case.


Step 3) Place the scanner in the handheld case. Start by placing the bottom of the scanner in the case first.


Step 4) Push the top of the scanner in the case until the bezels of the device are flush with the edges of the case.



IDVisor 3 Pistol Grip Setup Guide V1(2026)

    • Related Articles

    • AgeVisor Quick Guide

      AgeVisor Quick Guide The Quick Guide for the AveVisor scanner in PDF format AgeVisor Quick Guide AgeVisor Quick guide Word version AgeVisor Quick Guide

    • IDVisor Smart V1 Quickstart Guide and Manual

      Attached are the latest Quickstart Guide and Manual for the IDVisor Smart V1. Click on each attachment to view each document in the browser. To download, click on the download icon next to the attachment.

    • IDVisor Smart Plus Quickstart Guide and Manual

      Attached are the latest Quickstart Guide and Manual for the IDVisor Smart Plus. Click on each attachment to view each document in the browser. To download, click on the download icon next to the attachment.

    • How to Transfer Photos from your IDVisor Smart Device to Computer

      Connecting your Smart Device to transfer Files Step 1) Connect your device to your PC with a USB cable. Step 2) On your PC, open File Explorer. Look for your device under “This PC”. It will be named “PDA”. NOTE: For older devices it may be named “MTP ...

    • iVerifier Network Configuration Guide

      iVerifier Network Configuration Guide Setup When first setting up your iVerifier Network you will need the following: 1. FileMaker Pro (on your PC) 2. FileMaker Go (on your iOS device(s) – available for free download at the App Store) 3. TokenWorks ...