Q: I am attempting to configure the IDWedge to output complete, unedited Track1 data from a credit card, as my merchant requires this for Card-Present transactions. It appears as though this cannot be done by configuring CreditCard.txt so I have attempted to turn off the credit card parsing and use the Magnetic.txt but it will not output anything for credit cards. Is there a way to output complete Track1 data using the IDWedge? Thanks very much for any help you can give!
A: Yes its possible to output raw track 1 and/or raw track 2 data – See latest IDWedgeBT User manual – http://idscannerus.wpengine.com/manufacturing/idwedgebt-user-manuals-for-hid-and-spp/
Section 3.2 CreditCard.txt
The Credit Card formula uses lower case letters torepresent the fields on a credit card.
a= Track1 Raw data
b= Track2 Raw data
f= first name,
l= last name
p= PAN or credit card number
y= ExpYY,
m= ExpMM
n= Scanner S/N
Example: a{TAB}{ENTER} would output Track 1 Raw Data followed by Tab keystroke and then Enter Keystroke
NOTE: Raw data means all the information on a track including the start and end sentinels in ASCII format.
<addkey=”CreditCard”value=”True” />
<!– Controls how credit card data is parsed output- creditcard.txt –>
new versions of firmware can be downloaded from “software update” menu item on idscanner.us
Check the Device.txt file for version installed on hardware
end of post