IDWedgeBT not recognized as USB keyboard – Unknown Device

IDWedgeBT not recognized as USB keyboard – Unknown Device


IDWedgeBT not recognized as USB keyboard – Unknown Device

Problem Description: IDWedge BT not recognized as USB keyboard, unknown device. See picture below:

Trouble shooting

Possible fixes:

1.) UnPlug and replug non working unit into same USB port on PC. – it might get recognized properly.

2.) Plug non working unit into different USB port on PC. – it might be the USB port or driver issues with that USB port

 

If there are multiple units available.

1.)    Try cable from working unit on this computer – it might be a bad cable

2.)     Plug working unit into this computer – this will determine if it’s the scanner or the PC

3.)     Plug non working unit with cable into another computer.  Does the problem move with the non-working unit?  If the problem moves to new PC, then it’s the scanner.  If the problem goes away, then there is something about the original PC



    • Related Articles

    • IDWedgeBT User Manuals for HID, SPP and USB

      IDWedgeBT User Manuals for HID, SPP and USB HID Version IDWedgeBT HID Users Guide Version 3.2.pdf SPP Version IDWedgeBT SPP Users Guide Version 2.8 USB Keyboard Version IDWedgeBT Keyboard Users Guide Version 2.2.pdf

    • How to Setup IDWedgeBT as USB Keyboard on Mac OSX

      How to Setup IDWedgeBT as USB Keyboard on Mac OSX Connect the IDWedgeBT to the Mac with the included RJ50 / USB cable. The Keyboard Setup Assistant window will appear with the message “Your keyboard cannot be identified…” Press Continue. The ...

    • IDWedgeBT HID Bluetooth Keyboard Application Updater

      IDWedgeBT HID Bluetooth Keyboard Application Updater The IDWedgeBT Application Updater requires a special programming cable and a PC with a serial port, or a USB->Serial adapter. The application has on screen instructions on how to perform the ...

    • IDWedgeBT Firmware Update – using USB Virtual Serial Port Cable and Updater software

      IDWedgeBT Firmware Update – using USB Virtual Serial Port Cable and Updater software IDWedgeBT Firmware Update – using USB Virtual Serial Port Cable and Updater software Introduction This document explains how to update the firmware in an IDWedgeBT. ...

    • IDWedgeBT Keyboard Application Updater 2 3

      IDWedgeBT Keyboard Application Updater The IDWedgeBT Keyboard Application Updater requires a special programming cable, and a PC with a serial port, or a USB->Serial adapter. The application has on screen instructions on how to perform the update. ...