Power Supply – AgeVisor Touch

Power Supply – AgeVisor Touch


Power Supply – AgeVisor Touch

Replacement AgeVisor Touch Power Supply

Lost or Damaged your AgeVisor Touch Power Supply?

This post details the two power supplies used on the Age Visor Touch, how to tell them apart and Amazon links to buy replacements.  Units shipped between 2017-2019 had 5 volt power supplies.  Units shipped from 2020 have the 12 volt power supply.

NOTE: If you are having issues powering on your AgeVisor Touch please see post here BEFORE purchasing a new power supply.  You may not have a bad power supply.

Visit the Amazon links above the pictures provided to purchase a replacement power supply for your AgeVisor Touch.

Use the pictures and specifications provided to ensure you purchase the power supply specific to the AgeVisor Touch you currently own.

There are two types of power supplies (5 Volt and 12 Volt)  and power jacks for AVT.  See below.

 5Volt Power supply

Below are pictures of the 5 Volt power jack and power supply for the Age Visor Touch.  The power supply is 5V DC 3 Amp 3.5mm x 1.35mm Plug Center Positive.

 

5 Volt power jack on AVT and 5 Volt power supply

 Below is an Amazon link to a compatible 5 Volt power supply

Atolla US Standard Adaptor External Power Supply 15W (5V/3A) AC/DC Adapter for USB Hub, 3.5 x 1.35 mm Plug Center Positive

 


 12Volt Power supply

Below are pictures of the 12 Volt power jack and power supply for the AgeVisor Touch and AgeVisor Contactless The power supply is 12V DC 2 Amp 5.5mm x 2.5mm Center Positive Plug.

12 Volt Power Input Jack and Wall Power SupplyBelow is an Amazon link to a compatible 12 Volt power supply

COOLM AC Adapter 100-240V 50 60Hz to DC 12V 2A Power Supply Adapter for Ring Video Doorbell 5.5X2.5MM DC Jack





    • Related Articles

    • AgeVisor Touch Does Not Power Up

      If your AgeVisor Touch does not power up or is having any power issues please try these troubleshooting steps to address the issue: Note: Before beginning the troubleshooting steps please determine if your AgeVisor Touch is using a 12V or 5V power ...

    • Agevisor Touch and Contactless Unresponsive Touch Screen

      If your Agevisor Touch or Contactless screen becomes unresponsive to touch, please follow the steps below on how to correct the issue. Power Cycle Device Connect a USB Mouse and or USB Keyboard into the USB ports on the right side of the unit. Once ...

    • AgeVisor Touch Controlling windows updates

      AgeVisorTouch – Controlling Windows 10 Update AgeVisorTouch V. 1.0.1.8 has a new feature that let’s you control when/if Windows 10 will update. Windows 10 will automatically update the OS at the worst possible times – like in the middle of a busy ...

    • How to Export on an AgeVisor Touch AgeVisor POS

      How to Export on an AgeVisor Touch/AgeVisor POS Exporting Data on an AgeVisor Touch and AgeVisor POS The directions below explain how to export customer data from your AgeVisor Touch and AgeVisor software. The customer data will be exported as a csv ...

    • How to switch back to Windows OS on AgeVisor Touch

      FAQ: I don’t see AgeVisor Touch when I turn on the scanner. If you do not see AgeVisor Touch when you turn on the ID Scanner, the scanner may have mistakenly booted into the Android OS. If you have booted into Android the screen will look similar to ...