Windows Recovery Screen When Booting Up AgeVisor Touch
Problem: When powering on your AgeVisor Touch, you are taken to a blue Windows recovery screen as shown below. When trying to press any of the options shown on the screen the touchscreen does not respond.
This issue typically occurs when the AgeVisor Touch was shut down abruptly i.e power outage, removing the power cord before powering off unit. The Windows recovery screen will come up due to an improper shutdown.
When this issue occurs the touch screen on the AgeVisor Touch will become unresponsive. You will have to connect a USB mouse in order to access the windows recovery options on the screen. The USB ports for the AgeVisor Touch is located on the right side of the unit next to the power button. You can use any of the 2 USB ports to connect the mouse.
Once you have a USB mouse connected to the device please follow the troubleshooting steps below.
Step 1: Restart my PC
When the Windows recovery screen appears select Restart my PC. This will reboot the AgeVisor Touch. The AgeVisor Touch software should now boot as it normally should.
When the AgeVisor Touch has successfully booted correctly, you should be taken to the Main screen of the AgeVisor Touch software after 1-2 minutes.
If after selecting “Restart my PC” the AgeVisor Touch boots back up to the same Windows recovery screen, proceed to Step 2 below.
Step 2: See advanced repair options
If the “Restart my PC” option did not correct the issue, we will now use the advanced repair options.
Select See advanced repair options. This will take you to the windows recovery advanced repair options.
In the Advanced options window select Startup Repair.
After selecting Startup Repair you will be taken to the Automatic repair screen. The automatic repair will begin, when the progress reaches 100% the AgeVisor Touch will reboot and start up as normal.
When the AgeVisor Touch has successfully booted correctly, you should be taken to the Main screen of the AgeVisor Touch software after 1-2 minutes.
If after attempting the steps above your AgeVisor Touch is still unable to start up correctly or boots to the Windows recovery screen please click here to open a support ticket.
Related Articles
How to switch back to Windows OS on AgeVisor Touch
FAQ: I don’t see AgeVisor Touch when I turn on the scanner. If you do not see AgeVisor Touch when you turn on the ID Scanner, the scanner may have mistakenly booted into the Android OS. If you have booted into Android the screen will look similar to ...Agevisor Touch and Contactless Unresponsive Touch Screen
If your Agevisor Touch or Contactless screen becomes unresponsive to touch, please follow the steps below on how to correct the issue. Power Cycle Device Connect a USB Mouse and or USB Keyboard into the USB ports on the right side of the unit. Once ...AgeVisor Touch Controlling windows updates
AgeVisorTouch – Controlling Windows 10 Update AgeVisorTouch V. 1.0.1.8 has a new feature that let’s you control when/if Windows 10 will update. Windows 10 will automatically update the OS at the worst possible times – like in the middle of a busy ...FAQ: I don’t see AgeVisor Touch when I turn on the scanner.
FAQ: I don’t see AgeVisor Touch when I turn on the scanner. If you do not see AgeVisor Touch when you turn on the ID Scanner, the scanner may have mistakenly booted into the Android OS. If you have booted into Android the screen will look similar to ...How to fix a broken update on AgeVisor Touch, AgeVisor, IDWedgePro, IDVisor Sentry
How to fix a broken update on AgeVisor Touch, AgeVisor, IDWedgePro, IDVisor Sentry Last modified: October 9, 2019 at 10:17 am by Justin Problems with automatic software updates (message box indicating a problem with the update) If your Tokenworks ...