Wrong Age displayed - V1/V2/Plus/S50 - How to Set Date/Time

Wrong Age displayed - V1/V2/Plus/S50 - How to Set Date/Time


Wrong Age displayed - V1/V2/Plus/S50 - How to Set Date/Time

Description: If you’re receiving the wrong/incorrect age on every scan, please refer to the instructions below on how to set the date and time on your IDVisor Smart V1/V2/Plus/S50.


Incorrect Age shown. 




Step 1: Go back to the Main Screen then tap Setup.


Step 2: Tap on Set Date/Time.

If Connected To Wifi:



Step 3: If connected to Wifi, you can set the device to “Use network-provided time”. This option will use your Wifi network to always keep the correct time. 

Note: See here on how to connect your IDVisor Smart Device to Wifi.


Turn on Automatic time zone to use the Wifi network to set the Time Zone.


If not using Wifi or preferred to stay disconnected from a network: 


Tap on Select Time Zone then tap on Time Zone. Set the Time Zone for your location.


After setting the Time Zone, tap on Set Date to set the date.


Tap on the year, and then scroll down to select the correct year. 

Tap on the correct date to change the date. Then tap OK.




Once the date is set, set the correct Time.


Navigate back to the ID Scanner screen. 

You will now see the correct date & time in the top right hand corner. 

When an ID is scanner, it will now show the correct age. 







    • Related Articles

    • Wrong Age displayed – AgeVisor Touch/Contactless – How to Set Date/Time

      Wrong Age displayed – AgeVisor Touch/Contactless – How to Set Date/Time Description: AgeVisor Touch or AgeVisor Contactless is displaying the incorrect time. This is causing the incorrect age to appear when a customer is scanned. Follow the ...

    • Problem: AgeVisor Touch Date & Time is Incorrect/Resets

      Problem: AgeVisor Touch Date & Time is Incorrect/Resets Problem: AgeVisor Touch is displaying the incorrect time. The time value resets every 20 or 30 minutes, even after being set correctly. Cause: The operating system (Windows 10) is attempting to ...

    • Age Will Not Display Correctly On IDVisor Smart Plus

      Problem Description: Age will not display correctly on the screen. Customer age is not displaying correctly after a scan. This issue may be caused by the font size on the device being set to the largest setting. Please follow the steps below to ...

    • How To Set Grandfather Clause On The IDVisor Smart/Smart Plus/Smart V2

      As more and more States implement a Grandfather Clause for tobacco we have developed a feature within the IDVisor Smart/Smart Plus app to enable a Grandfather Clause. Please follow the instructions below to enable the Grandfather Clause feature on ...

    • How to Set Up Autofill Signature Capture Form on IDentiFake

      How to Set Up Autofill Signature Capture Form on IDentiFake How to Set Up Autofill Signature Capture Form on IDentiFake Description: Create a form that will auto-populate with the ID’s contact information and capture their signature with a date/time ...